How to Cut a Tree Down With a Chainsaw

how to cut a tree down with chainsaw

If you’ve never used a chainsaw before, there are some basic safety precautions you should follow. Be sure to wear the proper protective gear and follow proper felling technique. Below are some tips for using a chainsaw to cut down a tree. Keep reading to learn more. Listed below are the steps to properly fell a tree. Always remember to stay calm and move away quickly after cutting the tree down.

Safety equipment

Before you start cutting down a tree, make sure you have all the necessary safety equipment and are aware of the laws that apply to the work you do. Before you start, evaluate the location where you want to cut down the tree, plan where you will stand, and make sure the tree is at least twice as tall as you are. After you have decided where to cut, move away from the trunk of the tree at an angle.

Proper felling technique

During the fall of a tree, a notch needs to be made to guide the falling tree. The notch should be about one-fifth of the diameter of the tree’s trunk. When the notch is placed where the cut ends and the tree’s trunk starts, it acts as a hinge and guides the tree when it falls. Keeping this in mind, you can avoid injuries and ensure a safe fall.

Necessary safety precautions

There are some essential safety precautions to remember when cutting down a tree. First, cut on a horizontal line. Make sure the cut is at least 15 feet away from the stump. Second, set the chain brake so that you can safely retreat 15 feet away from the falling tree. And third, don’t turn around to see how the tree will fall. Trees can react unexpectedly and you need to be prepared for any eventuality.

Cutting a horizontal notch

The first step in cutting a horizontal notch when cutting a down a tree with a chainsaw is to clear the base of the tree of any roots. Next, remove the bark and make a notch of approximately 1/3 of the tree’s diameter. You’ll then want to make a second, horizontal cut at a 20-degree angle. Then, cut down toward the notch angle. Make sure the horizontal cut stops at about 25% of the diameter of the tree. When you’ve finished cutting the tree down with a chainsaw, make an undercut about 1/10th of its diameter, which is called a Humboldt cut.

Safety escape routes

One of the first steps to safety when cutting a tree down with a chainsaw is planning your safety escape route. It should be at least fifteen feet long and at 45 degrees to the direction of the fall. It should also be free of obstructions and tripping hazards. Make sure to trim the trees surrounding the tree to make the escape path free from any hazards. By planning your safety escape route, you can reduce the risk of serious injury when cutting a tree down.