How to Cut Down a Tree by Using a Chainsaw

how cut down tree chainsaw

You may have heard about how to cut down a tree by using a chainsaw, but you don’t know how to do it without hiring a professional. If you don’t know where to start, there are a few things you should know. Safety, Equipment, and Direction of Cut are the most important aspects of cutting down a tree. You should also remember to rope off the area to ensure everyone’s safety.


When using a chainsaw to cut down trees, always be sure to plan your escape route beforehand. The path of retreat should be at least 45 degrees from the fall direction of the tree. Moreover, you should have a reliable communication system, such as a two-way radio with fresh batteries. To avoid getting trapped, a qualified tree worker can use hand signals to signal to others. It is also vital to not cut trees during threatening weather conditions. Wind and rain pose serious hazards for workers, so always ensure that your safety is of utmost importance. Lightning can also affect the fall direction of a tree.

To minimize risk of falling, felling a tree requires considerable experience and knowledge. Before you begin, check whether there are people, power lines, and other objects in the fall path. If there are any, contact the power company, as they are experienced with safely removing trees. After consulting a tree specialist, you can safely and efficiently cut down trees. Just remember to follow these tips to ensure safety when using a chainsaw to cut down trees.


Cutting down a tree requires the use of protective gear. This gear should include a hard hat, eye protection, and gloves or boots. Additionally, earmuffs should be worn to protect your hearing. You should also keep first-aid supplies nearby. After cutting down the tree, make sure you dispose of all of the waste properly and recycle any wood chips and other tree materials. If you’re planning on cutting down more than one tree, you should consider investing in a trailer.

Besides chain saws, there are other tools needed during the procedure. Professionals use a variety of chain saws. The choice depends on the size and complexity of the job. There are small chain saws as well as big chain saws. Other equipment used by tree-cutter companies include a 4-wheel-drive truck to transport other machinery. You should also check the rigging tools for proper operation. It can be a combination of various tools, from winches to cable hoists.

Direction of cut

When you are cutting down a tree, you will first need to decide which direction to cut the tree in. For example, if you are cutting down a tall tree, it is best to make your top cut about one-quarter to one-fifth of the tree’s diameter. Next, you will want to make a downward-angled cut along the side of the tree, resulting in a wedge-shaped piece that points down. Make sure to make both cuts as precise as possible.

The next step is to find the center of gravity of the tree. This is critical for safety purposes, as a tree with its center of gravity toward the back of the cut may fall on the chainsaw and jam. If the tree falls on its own, it can break other trees and cause a domino effect. To avoid this issue, cut down the tree in calm weather. While there are no guarantees that a tree will fall on you or someone else, you can minimize the risk of injury by carefully considering the following tips.