How to Properly Use a Chainsaw

how to properly use a chainsaw

Knowing how to properly use a chainsaw is essential if you want to avoid damaging yourself and others. You should also use caution when using a chainsaw in bad weather and when using it on uneven ground. It is also important to keep the chainsaw oiled, and you should have a clear exit route. Listed below are some important safety tips to keep in mind when using a chainsaw. Follow these tips to use a chainsaw safely.

Avoid cutting with the tip of the saw

Using a chainsaw requires some special preparation. First, you should always ensure that the saw is firmly gripped by encircling the front handle. This way, you will avoid the chance of kickback when using the saw. Also, ensure that the chain is sharp and well tensioned. Lastly, you should cut below shoulder height. By following these simple tips, you can avoid getting injured while using a chainsaw.

Secondly, avoid cutting with the tip of the saw. A large limb may roll after being cut from the trunk. The blade may get stuck if it releases stored energy during the cut. To prevent this, place a wedge between the saw and the log. Always remember that you should never stand on a log. You’ll risk getting pinched, so be aware of your surroundings. Also, avoid cutting with the tip of the chainsaw.

Avoid cutting in a kickback zone

Kickback is a sudden upward motion of the guide bar caused by contact between the saw chain and the object being cut. The most common situation in which kickback occurs is when the saw chain makes contact with wood or other object. The tip of the saw blade can move toward the operator, resulting in severe injury. To avoid this, woodworkers should feel the material before making any major cuts.

Several factors contribute to kickback, including the size of the bar nose and the length of time the saw stays stuck. Concrete, for instance, is notorious for causing kickback. A chainsaw’s blade’s larger nose makes it more likely to hit concrete. In such cases, it may be best to avoid cutting in a kickback zone altogether. By following a few simple rules, you can virtually eliminate any kickback incidents.

Keep your chain oiled

Oiling a chainsaw is a simple maintenance step that helps ensure that it works properly. Chainsaws have self-lubricating reservoirs, which you should be sure to empty regularly and refill when needed. Proper oil levels prevent the chain from sticking to the engine and causing excess wear. Besides, lubricating your chain ensures that your chain moves smoothly and without putting too much stress on the engine.

Generally, the oil used in chainsaws contains a substance called tackifier, which provides lubrication for both the chain and the bar. It is highly recommended to avoid using old engine oil as it contains debris and does not have the right viscosity to provide proper lubrication. If you don’t have access to recommended chainsaw oil, certain oil substitutes may be able to be used.