If you want to start your STIHL chainsaw, then there are a few things you need to consider first. This includes making sure the chainsaw is properly oiled, making sure the saw is in good condition, and making sure that the fuel is clean. You should also check the master control lever to make sure it is on Choke and Cold Start.
Starting a STIHL chainsaw from a sitting position
Starting a Stihl chainsaw is very easy if you know the right way to do it. There are a few important steps you should follow to ensure you start the chainsaw safely.
First of all, make sure you are wearing protective gear. This includes gloves, safety glasses, and hearing protection. Wearing these items will ensure you are safe while operating the chainsaw.
Next, you will want to place the saw on a level surface. This will help prevent the engine from flooding.
After locating the correct position on the ground, you should open the oil cap slightly. This will reduce pressure in the oil tank. Once you have done this, tighten the filler cap.
Make sure the chain is in good condition. If it is in poor shape, you may have trouble starting the chainsaw. You should also check the spark plug. A faulty spark plug can cause the chainsaw to stall.
Setting the master control lever to Choke / Cold start
If you want to start your chain saw in style, you should first set the master control lever to a choke / cold start setting. This will allow for a more powerful air-fuel mix which will increase the performance of your saw.
The master control lever can be found on the left side of your chainsaw, behind the handle. It is a small lever that functions as an on-and-off switch. When the lever is pushed down, it changes the idle speed, as well as the on/off position.
You can also move the master control lever to the warm start setting to make it easier for your engine to start. After a few pulls, your engine should be up and running.
Checking if your chainsaw won’t start
If you have a Stihl chainsaw, there are several reasons why it might not start. You can follow the instructions in your operator’s manual to diagnose the problem. However, if you cannot find a fix, you should take it to a mechanic.
Typically, you will have to remove the spark plug to find the cause. To do this, you will need a chainsaw wrench. Then, you should gap the plug appropriately according to the manufacturer’s specifications.
Next, you will need to check the ignition coil. This is the part that sends voltage to the carburetor. A faulty ignition coil can cause the chainsaw to not work.
Also, you will want to check the recoil starter. If it’s working properly, you’ll be able to get the engine to start. But if it’s not, you will have to replace the starter.
Checking for bad fuel
If your Stihl chainsaw is not starting, you might need to check for bad fuel. Old gas can build up in the tank and clog the carburetor, preventing it from functioning properly. You’ll want to drain out the old fuel, fill it up with new, good-quality fuel, and add a fuel additive. This will help keep moisture and dirt at bay and keep the engine running smoothly.
Another problem that can prevent your Stihl from running is a spark plug that is clogged. The spark plug’s electrode should be checked to see if it is worn and if it is gapped correctly. A dirty spark plug can cause the plug to misfire or cause a spark plug voltage issue.
Some Stihl chainsaws have a spark arrestor screen that can become coated with carbon-based materials. This can restrict airflow to the engine and cause it to run hot.
Checking for a flooded chainsaw
If you’re having trouble starting your Stihl chainsaw, then chances are you have a flooded engine. This is a common problem that can be fixed with a few easy steps.
First, make sure you have fresh fuel in the tank. Gasoline does not last long, so a fresh supply is important. Next, check the spark plug to ensure it’s free of dirt and debris. Leaving a dirty spark plug can interfere with the spark and prevent your chainsaw from firing.
The next step is to clean the air filter. It’s important to do this regularly, especially when your saw hasn’t been used for a while.
Once you’re satisfied with the condition of the air filter, remove the spark plug. Typically, your chainsaw will start after a second or third pull.