Laying Sod – How to Lay Sod

how lay sod

If you are planning to lay your own sod, there are some important things you need to know. Here are some tips for laying sod, including preparing the soil, rolling the sod in the same direction, laying sod on curves, and watering newly laid sod. You can follow these steps to lay your own sod! Hopefully, you will find these tips useful! After all, the sooner you lay your sod, the better it will grow and be healthy!

Preparing the soil for laying sod

When laying sod, the first step is to prepare the soil. Clear the area of all vegetation and debris. Take a soil test to find out the pH level of your soil. If the soil is too acidic, you may want to amend it with horticultural sulfur. If it is too alkaline, you can amend it with composted oak leaves and pine needles. In either case, you will need to add at least one inch of topsoil to the area.

Once you’ve prepared the soil, it’s time to lay the sod. Lay it so that the edges are even. Avoid leaving gaps between rows and ends because this will cause the sod to droop and rot. Water the area lightly and back off when necessary to encourage deeper root penetration. Avoid overwatering the soil as it may lead to uneven sod that looks lopsided.

Rolling sod in the same direction

The proper method of rolling sod is to roll it in the same direction. Alternatively, you can roll it in a perpendicular direction, thereby creating a grid pattern. Rolling soil should be avoided during heavy rain as it may compact the wet soil and damage the sod. Instead, you can water the soil before rolling it. Rolling the soil in a perpendicular direction will help preserve the life of the sod.

Firstly, measure the area to be covered with sod and add about five to 10 percent to your total yard size. You can cut the second roll in half by stabbing it at the shorter seam. Next, make sure that each piece is snugly fitting the next one. Be sure not to overlap the edges of the two rolls. This will ensure that there will be no gaps in the sod, and the grass will look like one continuous piece of grass. Once the sod is installed, you should water it within 30 minutes to make sure that it will bond well with the native soil.

Laying sod on curves

If you have a garden with many curves, you may want to avoid laying sod on these areas. It’s easy to get frustrated with uneven lawns, but it’s easy to avoid this problem by following a few simple guidelines. To avoid a lot of unnecessary hassle, you can even try raking footprints away. To ensure that sod sets securely, avoid stepping on it. This will prevent air pockets and indentations.

First, prepare the sod site. This should start two months before you actually want to lay the sod. It’s a good idea to remove debris and prepare the area to avoid flooding near the foundations of the buildings. After that, prepare the soil by raking it and adding topsoil or composted organic matter. Then, use the rake to level the soil. Once the area is level, lay the sod on the curves.

Watering newly laid sod

The first few days after sod installation should be spent watering your newly laid lawn. Watering for longer periods of time will encourage the roots to attach to the ground more firmly and hold on longer. Make sure to water for at least 10 minutes each time, and make sure to stop watering your lawn at 5:30 pm or earlier to prevent fungus growth. You should not water your newly laid lawn more than twice a day, and you should avoid standing water on the sod for more than 10 minutes.

Before you lay the sod, test the soil’s pH by purchasing a test kit from a lawn and garden store. If the pH level is low, you should add lime or other soil amendment to improve the soil’s receptiveness to water. If it’s too acidic, add a small amount of starter fertilizer to the soil before installing the sod. Then, apply a starter fertilizer to the soil to help it reach a proper growing condition. It’s important to add phosphorus-rich starter fertilizer to the soil. This will promote a strong root system and help the grass establish itself.